|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Kenmore Mod: 587.14302201 |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
07-14-2011, 08:25 AM
|
|||
|
|||
Kenmore Mod: 587.14302201
Brand: -brand- Age: Less than 1 year
Hi there,
Greattings from Portugal, and sorry my BAD English  I am an CRT/LCD repair technician, but got this machine for repair, from an former migrant. It is complettely dead, no ligths what so ever. I have got an 220Vac to 110Vac transformer, got it connected and get the proper 110V on the main board (black). Door microswitches fine, thermal fuses on the lower part of machine also fine (one in series with heating resistor) and other for monotoring the water temperature, water level microswitch also fine. I have tested directely the drain pump, the circulation motor and electrovalves. Now the curious part  When the machine first went dead, the owner imported a new mainboard, that he replaced... still dead. He is now in Canada, and send me a new one, and still same problem.Board link: FRIGIDAIRE 154423702 Control,electronic, AP3211376 | AppliancePartsPros.com Any help... Best regards Nezocas Ads By Google Last edited by Nezocas : 07-14-2011 at 08:26 AM. Reason: Forgot link 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Kenmore Model 110 76652500 kenmore no heat | cgarza1 | Dryer Repair | 0 | 09-02-2010 02:09 PM |
Linear Mode
