[Heymate]

The little spinner thingy (3Rd level wash spinner kit ) has broken off again!

A year or so ago I had it replaced and it took the guy 2 or 3 trips to figure it out. If I order this part how easy is it to replace? I am assuming the whole machine has to come out ??? I have been putting this off but I feel encouraged by your forum so I will order the part if I can bolster up the courage!! Thanks!

[Gene]

As you can see on the break down diagram the spinner is attached to the water feed tube with a special pin. Looks like you have to remove the upper dish rack and disassemble the water feed tube from the rear panel.

- The part number for the 3rd level spinner is AP3177952

Gene.

[Heymate]

Thanks Gene. Looks like I can do this without pulling the unit out!!

[Heymate]

A newbie question but am I correct in my assumption that the water feed tube can be removed from the inside without pulling the unit out? Thanks in advance...heymate

[Gene]

Yes, it can. Remove both dish racks first.

Gene.

[Heymate]

Thanks again Gene. I have ordered the part. My last (I hope) newbie question is......What's the trick to removing the top rack. I have studied it but I know there must be a trick......Thankyou so much !!

[Gene]

You have to remove the track stop (#20 on the break down diagram) first on each side.

Gene.

[Heymate]

Thanks mate. Many thanks from the British Guy and his Dishwasher.PS...Got the part in ONE day as well. Thanks to all !!!!!!!

[Gene]

You are welcome. We are glad you were able to fix it.

Gene.