Rank: Member
Groups: Registered
Joined: 9/13/2010(UTC)
Posts: 11
|
I just rebuilt the pump on this machine and now I am getting almost no water flow into the washer. I checked the float, fill valve and timer for continuity, and they all showed it, but don't have a wiring diagram to check for open circuits.
Any ideas?
thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: jojosdad  I just rebuilt the pump on this machine and now I am getting almost no water flow into the washer. I checked the float, fill valve and timer for continuity, and they all showed it, but don't have a wiring diagram to check for open circuits.
Any ideas?
thanks JoJosDad, Your post indicates you most likely wont find a problem in the wiring or circuits, You have a slow fill, not a no fill situation. You have debris built up on the filter screen or flow washer, inside the valve body. You can dismantle the fill valve(remove the screws that mount the plastic valve housing to the metal mounting bracket) clean the debris from the screen, and check the flow washer. You also want to "flush" the water supply line to the valve before you re attach it to the valve connection. were it me, I would just replace the valve assembly, a little less work, with a more positive effect. Part number: AP2039339
But that's up to you. Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
