Dishwasher Repair

Rick P · #1 (**permalink**) 10-18-2007, 04:53 AM

I Replaced The Door Latch Assy. The Old One Had 2 Micro Switches Mounted On Each Side Of The Center Of The Assy. The Black Wires Were Connected To The Switch On The Right And The White On The Left. The New Latch Assy Was A Slightly Different Design With 4 Contacts Coming Out Of A Enclosed Column. I Connected The Black Wires To The 2 Contacts On The Right And White To The Left. Now The Dishwasher Will Not Run. The Indicator Lights Are Lit On The Control Panel So There Is Some Power. Do The Connectors Go On The Posts Differently? Adjustments?

richappy · #2 (**permalink**) 10-19-2007, 03:51 AM

Turn power off and verify both switches show continuity when door is closed. If ok you may have jarred loose a wire some place.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frigidaire (Electrolux) Latch assembly repair	Melv	Dishwasher Repair	1	02-04-2008 11:26 AM
detergent release latch	linjarob	Dishwasher Repair	1	10-03-2007 10:08 PM
replace door latch	cyoung8151@sbcglobal.net	Dishwasher Repair	1	09-11-2007 04:57 AM
Maytag Front loader door latch assembly	bpcolll	Washer Repair	4	08-29-2007 10:55 AM
Door latch assembly or user interface?	CMC1	Washer Repair	1	08-10-2007 11:15 PM

replaced latch assy- now won't run

Dishwasher Repair

I Replaced The Door Latch Assy. The Old One Had 2 Micro Switches Mounted On Each Side Of The Center