|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » New coupling (AP3963893) won't mount flush on gear box drive (only goes on 1/2 way)? |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-18-2011, 12:32 PM
|
|||
|
|||
New coupling (AP3963893) won't mount flush on gear box drive (only goes on 1/2 way)?
Brand: Kenmore Age: 5 - 10 years
How do I seat the new direct drive washer motor coupling (AP3963893) so that it is flush on the gear box? I removed the damaged one, but the new one only seats about 1/2 way down. I've tapped it very lightly, but it doesn't want to go down any further... I'm afraid of damaging it by forcing it...
Help/suggestions would be appreciated! -daliddle Ads By Google 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
02-18-2011, 12:41 PM
|
|||
|
|||
|
I place a 1/2" socket or nut driver over it and tap with a light hammer or mallot, until it's flush with the end of the shaft.
|
|
02-18-2011, 12:43 PM
|
|||
|
|||
|
Thanks, that is working!
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Broken drive gear | Ed Maher | Trash Compactor Repair | 3 | 01-06-2011 07:30 AM |
| nut on drive shaft that holds on plastic drive gear | ttzcomet | Trash Compactor Repair | 0 | 12-08-2010 05:28 PM |
| New Universal Motor Coupling (part no AP3963893 ) (direct drive) won't fit properly | felixq78 | Washer Repair | 1 | 05-03-2010 07:27 AM |
| jenn air compactor drive gear | fxcarden | Trash Compactor Repair | 4 | 01-14-2009 06:09 PM |
| Whirlpool Direct Drive - reasons for drive coupling failing | FriarTuck | Washer Repair | 1 | 11-12-2007 01:34 PM |
Linear Mode
