Dishwasher Repair

ggreen3 · #1 (**permalink**) 12-16-2008, 12:32 PM

Bought new door seal and bracket from Appliance pros, everything installed tight, but door wont close without major pressure. is there a smaller seal for this model??

Gene · #2 (**permalink**) 12-17-2008, 05:14 PM

What is the part number for the door seal? How did you find it if the model number you posted does not come up?

Gene.

ggreen3 · #3 (**permalink**) 12-18-2008, 01:44 AM

Okay the model number on the tag in the diswasher is DU300xr1, when i put it in the website it referred me to Du3000xr1. The diagram on the site matched the dishwaser to a t, so i went ahead a purchased the seal based on the manuel. The part number i ordered was AP3115122.

Thanks for responding, looking forward to your take.

Gene · #4 (**permalink**) 12-18-2008, 09:17 AM

It is normal to increase the door closure force after a new gasket installation. It should lower after a few cycles with hot water and heated dry.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I replaced the hinges and now the door won"t close.	david4031	Oven Repair (including Ranges and Cooktops)	2	11-06-2009 11:10 AM
whirlpool ice dispenser chute door wont close	tksnyder	Refrigerator & Freezer Repair	1	05-22-2009 10:59 AM
oven door wont close all the way	jbethfoust	Oven Repair (including Ranges and Cooktops)	1	01-27-2009 02:31 PM
Ge Refrigerator Door Wont Close All The Way	DAN L	Refrigerator & Freezer Repair	0	07-24-2008 01:43 PM
door doesn't close so seal is making contact all around door	d ahern	Refrigerator & Freezer Repair	0	10-08-2007 06:44 AM

Replaced Door seal, door wont close

Dishwasher Repair

Bought new door seal and bracket from Appliance pros, everything installed tight, but door wont close without major pressure. is