|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Cyle won't advance |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-17-2011, 06:34 PM
|
|||
|
|||
Cyle won't advance
Model Number: GSDL112F02BB Brand: GE Age: 1 - 5 years
My dishwasher won't advance throught the cycles. It gets stuck and when I move the gauge manually on the door it may start to fill with water and the soap dispenser empties but it won't advance. It may at times begin to fill with hot water but it will stop and then it has a hot smell. My husband has fixed it before by clearing the lines of all the gunk from it to the disposal but he doesn't want to do it again because of the burnt smell. Is it dead or could it be fixed with a new part?
 Thank you for your help.Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| only spins in reg cyle | sandrad@maine.rr.com | Washer Repair | 1 | 01-17-2011 07:37 AM |
| water doesn't drain at end of cyle | feile | Dishwasher Repair | 6 | 01-16-2011 06:25 PM |
| Spin cyle issue | irishgond | Washer Repair | 28 | 11-02-2010 11:09 AM |
| Stall in rinse cyle | mla7777@yahoo.com | Washer Repair | 3 | 02-08-2010 07:06 AM |
| cleaning cyle comes on automatic | ronnief | Oven Repair (including Ranges and Cooktops) | 0 | 09-04-2007 01:04 PM |
Linear Mode
