Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
km
Options
Go to last post Go to first unread
kevin melin  
#1 Posted : Saturday, January 22, 2011 10:25:25 AM(UTC)
Quote
kevin melin

Rank: Member

Groups: Registered
Joined: 1/22/2011(UTC)
Posts: 3

re dishwasher

when i push the start resume button it flashes
nothing else happens.

the door is firmly closed and the breaker is not tripped
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Sunday, January 23, 2011 2:39:37 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for KENMORE 66517052402 by Kenmore Elite | AppliancePartsPros.com

Could be the thermal fuse is blown.
It will be on/near the control board.
Remove it and check it with a meter, should be 0 ohms.
If blown be sure to use the new wiring harness that comes with the replacement fuse.
THIS FORUM IS DEAD!!!!!!!
kevin melin  
#3 Posted : Monday, January 24, 2011 5:24:48 AM(UTC)
Quote
kevin melin

Rank: Member

Groups: Registered
Joined: 1/22/2011(UTC)
Posts: 3

when we initiate the diagnostic sequence by pushing normal wash heated dry normal wash heated dry, all the ligts on the control panel come on then they go out , then you can start the machine s wash cycle but it is an abbreviated cycle . When it is done the clean light flashes and it will not work again unless you innitiate the diagnostic sequence again




Originally Posted by: denman Go to Quoted Post
Here are your parts
Replacement parts for KENMORE 66517052402 by Kenmore Elite | AppliancePartsPros.com

Could be the thermal fuse is blown.
It will be on/near the control board.
Remove it and check it with a meter, should be 0 ohms.
If blown be sure to use the new wiring harness that comes with the replacement fuse.
kevin melin  
#4 Posted : Monday, January 24, 2011 5:27:22 AM(UTC)
Quote
kevin melin

Rank: Member

Groups: Registered
Joined: 1/22/2011(UTC)
Posts: 3

:confused:
Originally Posted by: kevin melin Go to Quoted Post
when we initiate the diagnostic sequence by pushing normal wash heated dry normal wash heated dry, all the ligts on the control panel come on then they go out , then you can start the machine s wash cycle but it is an abbreviated cycle . When it is done the clean light flashes and it will not work again unless you innitiate the diagnostic sequence again
could it still be the thermal fuse after all this.:)
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
KMBS104ESS02 wont start. Some buttons unresponsive (Microwave Repair)
by Guest 7/10/2022 1:22:03 PM(UTC)
Ckmnu (Washer Repair)
by CKMNU 10/23/2011 9:03:31 AM(UTC)
rkmcprez (Washer Repair)
by rkmcprez 8/17/2011 8:08:36 AM(UTC)
JVM-1851BH06 GE Spackmaker xl 1800 (Microwave Repair)
by zahoorshah 12/10/2010 6:26:17 AM(UTC)
wszkm (Washer Repair)
by wszkm 10/16/2009 10:39:22 AM(UTC)
needparts for miele km326 g cooktop (Oven Repair (including Ranges and Cooktops))
by peter erb 5/17/2009 6:18:51 PM(UTC)
Whirlpool KM-27 dead, no power (Microwave Repair)
by gospog 5/7/2008 10:43:23 AM(UTC)
PAKMANs Water drip in the Frig (Refrigerator & Freezer Repair)
by PAKMAN 12/26/2007 5:00:58 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.