Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Dreiding  
#1 Posted : Monday, September 8, 2008 5:56:43 PM(UTC)
Quote
Dreiding

Rank: Member

Groups: Registered
Joined: 9/8/2008(UTC)
Posts: 1

My Maytag dishwasher (MDB9100AWQ) seems to be running, but the disches are being cleaned. I suspect the Spray Arm have deposits stoping the spray from being effective. I have a few questions:
[LIST=1]
  • How do I remove the upper basket? It's starting to rust and needs replacing.
  • What's the best way to clean off the deposits? My guess it it's best to remove the arms and clean them separately.[LIST=1]
  • How do I remove the lower spray arm?
  • How do I remove the upper spray arm?[/LIST]
    [/LIST]I've read you "just pull them off". Is using a crow-bar like tool suggested or recommendated?

    Thanks,
    - Pat
  • Sponsor
    See inside of your appliance - diagrams and part photos for virtually every model.

    powered by AppliancePartsPros.com
     
    libertyappl  
    #2 Posted : Monday, September 8, 2008 6:56:20 PM(UTC)
    Quote
    libertyappl

    Rank: Advanced Member

    Groups: Senior Expert
    Joined: 8/13/2008(UTC)
    Posts: 3,097

    For starters the top rack from this site(and this is the cheapest place to get it) is part # AP403825 @$87.63
    To remove this rack just remove the cap at the end of the track and slide the rack out. To remove the spray arms Look at this diagram (Model MDB9100AWQ) remove part # 34 for the lower arm and #31 for the upper arm.
    Hope that helps
    Nat
    Quick Reply Show Quick Reply
    Users browsing this topic
    New Topic Post Reply
    Forum Jump  
    You can post new topics in this forum.
    You can reply to topics in this forum.
    You can delete your posts in this forum.
    You can edit your posts in this forum.
    You cannot create polls in this forum.
    You can vote in polls in this forum.