Dishwasher Repair

rchiga · #1 (**permalink**) 09-12-2007, 08:51 AM

When you try and start the machine, nothing happens. The L.E.D. display is dead. The dishwasher is getting power. I am able to do a L.E.D. check and all the L.E.D.'s light up. Other than that, nothing happens. The machine displayed the number 9 on the screen once when this happened before. Could it be a bad board behind the buttons or a bad latch?

richappy · #2 (**permalink**) 09-13-2007, 02:16 AM

Verify voltage coming from the latch switches, if ok, verify voltage to the control module. If voltage, replace control module.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE oven dead after cleancycle	Diet	Oven Repair (including Ranges and Cooktops)	7	09-11-2007 01:32 PM
Power Outage-Now My Dryer Is dead	Annie	Dryer Repair	0	08-14-2007 08:49 AM
Dryer Control Panel Dead!	Corel	Dryer Repair	1	08-10-2007 08:47 PM
Microwave plugged on wrong socket is dead	danny2001s	Microwave Repair	1	07-28-2007 06:13 PM
GE Range Display Dead	markham	Oven Repair (including Ranges and Cooktops)	0	07-25-2007 08:59 AM

dishwasher is dead

Dishwasher Repair

When you try and start the machine, nothing happens. The L.E.D. display is dead. The dishwasher is getting