Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
maytag touch pad
Options
Go to last post Go to first unread
Model: MDBH968AWS3 Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
twogrips  
#1 Posted : Saturday, June 12, 2010 10:52:59 PM(UTC)
Quote
twogrips

Rank: Member

Groups: Registered
Joined: 6/12/2010(UTC)
Posts: 2
I think my touch pad is shorted. does anyone have the part number for the touchpad
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
twogrips  
#2 Posted : Saturday, June 12, 2010 11:06:50 PM(UTC)
Quote
twogrips

Rank: Member

Groups: Registered
Joined: 6/12/2010(UTC)
Posts: 2
Originally Posted by: twogrips Go to Quoted Post
I think my touch pad is shorted. does anyone have the part number for the touchpad


details: all led's on the touch pad work except the autowash and time delay. the stop/drain works and the drain pump starts pumping when pressed. the start light will not come on and it will not start when it is pressed. when i press the heavywash, medium wash and light wash the led's for the different cycles work but when i press the autowash button the led's dont change nor will the dishwasher come on when the start button is pressed. NOW with that said the other night i was messing around in the kitchen and hit the autowash button and it came on then i hit the start button and it started. wtf? then it never worked again after that one episode. please help and supply part number to the touch pad if you have it available. thanks in advance for your help. mdbh968aws3 maytag dishwasher topveiw touch pad
Back to top
denman  
#3 Posted : Tuesday, June 15, 2010 7:44:08 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for MAYTAG MDBH965AWS Dishwasher - Undercounter | AppliancePartsPros.com
Not sure about the 3 at the end of your model number.

Here is a tech sheet
http://www.servicematters.com/docs/wiring/TechSheets_11_17_09/Schematic%20-%20W10231569.pdf

Control Panel is Item 1 in Section 1.

The usual way to trouble shoot this is to read then switch outputs from the control panel (keypad) with a meter.
Perhaps you just have a bad start key.

If the keypad checks out OK then it is probably the control board that is toast. Still a bit of a crap shoot but your odds are better.

You may want to try the following
Connector Cleaning / Checking
Unplug the unit
Open it up
Remove the ribbon cable from the keypad to the control board at the control board.
Clean the edge connector.
If it is the type where there is not a connector just the insulation is removed, it can be cleaned with a pencil eraser. Do not use an ink eraser as it is too abrasive.
Check the tracks in the ribbon cable for hairline cracks. A magnifying glass helps here.
Would not hurt to clean the connector on the board. Use electronics contact cleaner or isopropyl alcohol and a tooth brush. Be gentle and do not reconnect till all the solvent evaporates.
Reconnect everything and give it a try.
THIS FORUM IS DEAD!!!!!!!
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
maytag touch pad? (Dishwasher Repair)
by jiml 10/24/2012 10:48:32 AM(UTC)
Maytag Touch pad not working (Dishwasher Repair)
by bergy 8/18/2010 7:30:48 AM(UTC)
Maytag Touch Pad (Oven Repair (including Ranges and Cooktops))
by ksylvester 4/29/2009 11:56:30 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET