Welcome to Repair Blog!

Filed Under News

Repair Blog is a brand new service from AppliancePartsPros.com. From “How-to” guides and troubleshooting charts to industry news and¬†appliance recalls,¬†repair blog will have useful information for homeowners, real estate professionals, and appliance technicians. The blog will be officially launched in several days so please bookmark and check back soon.

Don’t forget to check out our brand new Appliance Repair Forum, where you can post a repair question and get expert advice from the Pros!


Comments

21 Responses to “Welcome to Repair Blog!”

  1. Lola Yates on July 23rd, 2007 4:23 pm

    I read a couple of solutions on your website last week on how to repair, or unclog a refrigerator drain pipe. But I have a much better solution to the problem when the drain is stopped up with frozen water. Open the freezer door and run a Hair Dryer on highest setting for about 10 minutes, longer if needed. You’ll be amazed at how fast the drain will start dripping in the drip pan below instead of inside the refrigerator. I’ve been doing this for several years. It even works when the lines get frozen in ice makers and ice cream machines.

  2. loadster on August 6th, 2007 8:39 am

    that’s a good fix but what’s the cause? I’ve found the end of the drain must be kept clear of fuzz and dust bunnies and the inside of the fridge and freezer must have good circulation and not be set over-cold to prevent freeze-ups. Experimentation in location of freezer items should make manually de-icing with a hair-dryer less frequent and fewer semi-thaw of goods necessary.

  3. Gloria Gresham on August 27th, 2007 5:00 pm

    My gibson upright freezer is not getting cold enough to freeze things on the door. We have turned it to the maximum of 7,Do you know what is wrong.

  4. ron bitten on September 9th, 2007 8:06 pm

    what is the cure for a freezer that is not defrosting. i have an amana refrigerator, model arb190zcc. what are the possible solutions. thank you ron bitten

  5. boop on September 10th, 2007 5:40 pm

    I have a kenmore frig…Im have the new part (motor evap fan) Im trying to assemble it back together. Having a hard time :( Can anyone help me where I can get a copy of manuel on how to assemble this part back and get my frig up and running ASAP.

    Thanks for your help !!

  6. APP Team on September 10th, 2007 5:50 pm

    Hi,

    Please post your repair questions on our forum at http://forum.appliancepartspros.com and someone will help.

    Thanks,

    APP Team

  7. shirl on September 15th, 2007 1:04 am

    just wanted to say thank-you for the very fast service i got on the oven element i orderd by the lowest price shipping on wednesday night,the order shipped out thursday, got here friday and i
    (69 year old great granny) put the thing in and it works great, had cornbread tonight using the oven which is in my whirlpool stove that is 15 yeard old.

  8. APP Team on September 17th, 2007 4:34 pm

    Nicely done, Shirl! We’re very happy we could help.

  9. nanci on September 25th, 2007 8:50 pm

    my dryer is whipool is not getting hot i dont know what to do can some body heeelp me please .

  10. nanci on September 25th, 2007 9:43 pm

    MY DRYER IS WHIPOOL IS NOT GETTING HOT I DONT KNOW WHAT TO DO CAN SOME BODY HEELP ME PLEASE.

  11. Jeanette on October 2nd, 2007 1:44 pm

    My top loading Whirlpool washer will not always go into the final spin.
    A while back we had the same problem and had a switch under the door replaced.Now if I fiddle with the switch it will work if I go thru the whole cycle.
    Do those switches come with any guarentee? I’m trying hard not to let that lid bang down hard.That’s what the repairman said was the main cause for the problem.
    Let me know what to tell my husband.
    Thank-you,Jeanette

  12. Bryan Mays on October 4th, 2007 7:23 am

    I have a Hotpoint Dryer. This dryer is overheating
    and emitting a smell. The longer the dryer runs, the heating element seems to be getting hotter.
    What would I need to do to correct this situation?
    Are there any parts that I could replace?

  13. Sadie on October 11th, 2007 2:45 pm

    My washing machine is not spinning but the water is running out good and running in good but just not spinning.It;s a whirlpool mod.LXR7244JQ1

  14. APP Team on October 17th, 2007 8:53 pm

    Please use our repair forum to post your questions: http://forum.appliancepartspros.com

    Thanks,

    APP Team

  15. heidi on October 30th, 2007 1:09 pm

    Hello! My Frigidaire refrigerator (model FRT21C5AW4) is just cool, not cold. I have it turned all the way up to the coldest setting. The freezer is working fine. I cleaned the coils underneath, to no avail. Any solutions?

  16. frankie on October 30th, 2007 5:06 pm

    have a ? my ge dishwasher will not drain is there a rest button on this dishwasher or can anyone help me out with my issue?

  17. GE microwave on November 13th, 2007 9:18 am

    On GE microwave, I suspect a lose connection in the power board, I tried hard to open it, or take it out ( it looks like it should slide up out ) but I could not.
    Could you pl. tel me how to take it out…
    Thanks…Abe

  18. Bob Newman on November 26th, 2007 10:10 pm

    I need a schemtic for a Delonghi Model Dcu62 coffee maker.

  19. APP Team on November 27th, 2007 6:45 pm

    Bob, for Delonghi repair and service manuals try http://www.delonghi.com/Int/USA/customer.html

  20. Rick on January 9th, 2008 12:50 pm

    I have a Kenmore Dishwasher model number 665.16579200. I need to clean out the Ultra Wash module, beneath the screen. There is a lot of build up of lime, food. How do I remove the lower spray arm in order to access below?

    Thanks. Rick

  21. scott on March 3rd, 2008 12:07 pm

    i have a whilpoor dryer type dadt-ele-2y06028-el5y
    the controlpanel lights up but when you press strats all you here is a bip help??

Leave a Reply