Navigation: Repair Blog / Blog article: Whirlpool Redesigned Upper Dishrack


Whirlpool Redesigned Upper Dishrack

Filed Under Dishwasher Repair

If you have received Whirlpool part number 3369903, this dishwasher dishrack has been redesigned and needs some assembly.  This can be done easily using the instruction sheets at Service Matters.

For help with this repair and other appliance repairs visit our Repair Forum.

April 25, 2008 in Dishwasher Repair | Permalink

Comments

6 Responses to “Whirlpool Redesigned Upper Dishrack”

  1. Mary Jane Guy (Jane) on May 30th, 2008 8:34 pm

    Maytag: model DU4500V: serial #17950497UH
    Late April ordered small arm in top of dishwasher.
    We have attempted to install part but each time the dishwasher is run the part comes off. Do you have a suggestion? Thank you.
    Jane

  2. Chris on June 28th, 2008 10:58 am

    Please help!!! Before I buy a new dishwashser, can anyone give me a good guess why my top arm is not spinning. Under top rack. It gets water. All filters and pipes are clean. Washed machine with CLR 2X. Water is getting to it. My water pressure in the house is excellent. What am I missing?

  3. Chris on June 28th, 2008 11:03 am

    It’s not the rack that is the problem it is the middle arm that does not spin. The manuel says that the bottom arm and the top arm take turns spinning, But they are bothe getting water and the only the bottom one spins.

  4. Chris on June 28th, 2008 11:06 am

    It’s frigidaire, FBO750CBO

  5. Chris on June 28th, 2008 11:09 am

    Sorry FDB750CBO Please help with mid arm not spinning. Why is the pressure not hard enough?

  6. Ken Derrickson on July 5th, 2008 5:00 pm

    I have no power Whirpool dishwasher model#DU915PWSO

Leave a Reply