Appliance Repair Forum

Appliance Repair Forum (http://forum.appliancepartspros.com/)
-   Blender Repair (http://forum.appliancepartspros.com/blender-repair/)
-   -   Hobart K45 Wiring (http://forum.appliancepartspros.com/blender-repair/529029-hobart-k45-wiring.html)

lippy 06-27-2013 10:33 AM

Hobart K45 Wiring
 
Does anyone have any information on the wiring for a Hobart manufactured for KitchenAid K45 stand mixer? This is a pre-KitchenAid built…pre-solid state design. Even a photo with the back cover removed would help.

I took the thing apart to replace the power cord and did not take notes on the wiring. There is no diagram or schematic on the internet that I was able to find.


Thanks

lippy 07-20-2013 09:58 AM

15+ days; 300+ views and nothing...about what I was able to find on the web.

I have a Plan B *cringe*: buy one on FleaBay and dissect it. But then I will have two.:p

csawy 10-31-2013 08:14 PM

link to Hobart K45 repair manual
 
This is what you are looking for - took me four hours to find it on the internet. I am not altruistic per se, I am replacing a line cord also. All of the instructions out and about are for the very inferior K45ss. This should take care of you. Have fun.
Kitchen Aid K45 Service Manual (For Hobart Made Vintage Mixers)


All times are GMT -7. The time now is 08:39 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17