[tblackw]

My mixer will only work in high speed. What part do I need to replace?

[Joe / APP Team]

Originally Posted by tblackw

My mixer will only work in high speed. What part do I need to replace?

Tblack,

There are 2 possibilities,based on your description,

A broken Control Plate Spring

Part number: AP2930085

and or a bad Motor Phase Control Assembly

Part number: AP3177667

You'll have to remove the end cover plate from the back of the mixer "head" and the side trim plate screws to access the phase control and the spring, after you raise the upper housing from the lower housing by removing the screws holding the assembly together.

Good Luck,

[tblackw]

How do you repair these parts?

[tblackw]

I meant replace this parts?

Any instructions?

[Joe / APP Team]

Originally Posted by tblackw

I meant replace this parts?

Any instructions?

The manual is not a PDF file, I can't attach it to a response.

If you can send me a fax number, I'll be happy to send you the appropriate information, to assist you.

[tblackw]

Originally Posted by Joe / APP Team

The manual is not a PDF file, I can't attach it to a response.

If you can send me a fax number, I'll be happy to send you the appropriate information, to assist you.

Fax:706-428-8617

Need instructions on how to replacing the phase control board on my Kitchaid Mixer, Model K45SSWH.

[Joe / APP Team]

Originally Posted by tblackw

Fax:706-428-8617

Need instructions on how to replacing the phase control board on my Kitchaid Mixer, Model K45SSWH.

Tblack,

Just faxxed the pages from the manual for you.You'll have a few extra pages.

[Ronpaul]

How do you repair these parts?

[Joe / APP Team]

Originally Posted by Ronpaul

How do you repair these parts?

Ron,

Did you not recieve the service manual we faxxed ?