Blender Repair

papilcher · #1 (**permalink**) 11-08-2010, 07:33 AM

I need instructions on how to replace the Drive Coupling

magician59 · #2 (**permalink**) 11-08-2010, 07:42 AM

Here's a parts breakdown drawing. It looks like the coupling just pulls off the motor shaft. Replacement parts for WHIRLPOOL KSB5WH4 5 - Speed Blender | AppliancePartsPros.com

papilcher · #3 (**permalink**) 11-08-2010, 07:50 AM

I tryed to pull the coupling off to no avail. ewhat now?

magician59 · #4 (**permalink**) 11-08-2010, 07:58 AM

I would try to see if it will unscrew from the motor shaft, then. To do this, you will need to open up the case (screws on bottom), and secure the motor from spinning by inserting a tool like a screwdriver into the armature. Be very careful not to harm the windings of wire. Then try to unscrew the coupling (probably reverse threaded). Don't force it if it doesn't work that way.

NONAMEGIVEN79 · #5 (**permalink**) 05-06-2011, 12:27 PM

Testing For Customer

NONAMEGIVEN79 · #6 (**permalink**) 05-06-2011, 12:28 PM

Test For Customer

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kitchenaid blender part ?	needadvice	Blender Repair	0	06-09-2010 08:34 AM
Kitchenaid blender top	RossDill	General Talk	0	03-27-2009 09:03 AM

KitchenAid Blender Model#ksb5wh4

Blender Repair

I need instructions on how to replace the Drive Coupling Ads By Google