View Single Post
  #9 (permalink)  
Old 06-09-2009, 03:31 PM
sidfink43 sidfink43 is offline
Senior Expert
APP Volunteer
Join Date: Mar 2009
Posts: 11,699
sidfink43 is a jewel in the rough

That's right. Make sure the first piece is set down tight and that the brass piece is all around the second piece.

Hope this works. Again, I would operate the machine with the front panel off so you can see exactly what is happening. Sometimes with a small leak you will want to wrap a piece of paper towel around the fitting so you can be sure and see it, a lot times it is to small to view.

Good luck and let us know how it turns out.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17