are you getting 110vac to the ignitor ? check with a multimeter the two wires that go to the ignitor .. the Frigidaire ignitors come with 2 ceramic wire nuts... with the power off cut the wires and strip back 1/4 " ... make sure they do NOT touch ... test with meter ( hopefully using aligator clips ) ... set to 200vac and plug power to oven in and turn to bake .. meter should read 110vac ( or somewhere near that , maybe 120vac ) if you have that then disconnect power and connect new IGNITOR and mount GENTLY.. they are fragile, DO NOT TOUCH IGNITOR part... just the ceramic base...
__________________
regards
jim
|