View Single Post
  #4 (permalink)  
Old 12-06-2017, 07:35 PM
thorning thorning is offline
Senior Member
Join Date: Aug 2012
Posts: 248
thorning is on a distinguished road

Originally Posted by Maverick1 View Post
The high limit has continuity. Also I bypassed the thermal fuse and ran it. The outgoing air measured 165 then down to about 135 then up again. Cycle five or six times. Is that range OK? Currently assuming the problem was the hose partially blocked. Just hard to believe since it didn't look too bad. Any thoughts?
That temp is about right based on some testing I did on a dryer recently. The thermal fuse blows when the air flow is blocked or significantly restricted. I changed one today and the amount of stuff in the blower air flow was considerable.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17