I was doing my testing yesterday and the dryer heated in the medium heat setting. So today I do a load of laundry and again no heat.
I do have 240 on the meter, the timer/switch test as the diagram indicates. I tested both the Timer and heat selector switch.
I decided to go through and retest all of the thermostats and coils.
Safety Left - 0.4 ohms
Control Inlet - Outside terminals / 0.4 ohms
Inside terminals / 8.97k ohms
Hi-Limit Right - 0.4 ohms
Drum Outlet - Outside terminals / 0.4 ohms
Inside terminals / 8.91k ohms
Heater Coils - Inner / 19.8 ohms
Outer / 19.9 ohms
I have also attached a photo of the wiring diagram incase it helps any.