View Single Post
  #2 (permalink)  
Old 06-09-2017, 07:25 AM
brobriffin brobriffin is offline
Senior Member
Join Date: Jun 2014
Location: Florida
Posts: 780
brobriffin is on a distinguished road

Not starting (when power is known to be good) is a symptom of 1st a blown thermal fuse also called a thermal limiter or 2nd bad door switch or 3rd bad start switch (built into timer).
First of all check to see if the door switch has continuity when closed.
Second check to see if all the wires were place back on the elements and thermostats and thermal cut in the right order and are seated properly. Especially check the thermal fuse (thermal limiter) on the back wall of the dryer near the terminal block to see if the wires are seated and if it has continuity.
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17