View Single Post
  #74 (permalink)  
Old 08-26-2013, 03:07 PM
Techidon441 Techidon441 is offline
Junior Member
 
Join Date: Aug 2013
Posts: 2
Techidon441 is on a distinguished road
Thumbs up defroster swap

Quote:
Originally Posted by jmkinch View Post
Got mine fixed. Found that the heater on the refrige evap was bad. Ohmed out and found it to be open. Saw no burns or broken wires. Had to buy the entire evap assy to get the heater. Took off the heater on the new unit and installed it on the original. No need to break the connections on the evap and go through all those issues of reclaiming, sweating new fittings, etc. Heater ohmed out around 70.
HI jmkinch, I have a Samsung RS253-BABB, side by side. Twin evaporators; fridge side had frozen coils. I can see that that the defrost heater is built onto the evaporator coil as a unit. Did an ohms test on the heater coil & got NO continuity. When you did the defroster swap, were you able to loosen the coil assembly from the chassis or did you do it in place? Last time I looked, I couldn't tell if it was screwed or riveted at the bottom. Any tips or tricks to the procedure?
Thanks

Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17