View Single Post
  #17 (permalink)  
Old 06-02-2013, 08:37 AM
joekid joekid is offline
Junior Member
 
Join Date: Jun 2013
Posts: 2
joekid is on a distinguished road
Default Why Does The Unit Have Extra Heat To Make Water Hotter

Quote:
Originally Posted by abadfish66 View Post
Turn the water heater down to about 130, Ge does not recommend temp above 140. If your water if soft, you are using way too much detergent, 2 tablespoons is plenty of soap. Remember, hard water = more detergent, soft water = less detergent. This is probably your biggest problem. Look at the detergent, does the outside say with shine shield, if it does that is the same as jetdry and by using the jetdry in the tank and in the soap, that is a problem. Use either the jetdry in the tank or in the soap, but not both. Also you say you rinse the dishes well before putting them in, by doing this and using too much soap, you are creating a sudsy mess inside the washer, and nothing will get clean. So to highlight,

1. Use 2 tablespoons of soap, and no more. This is plenty.
2. If the cascade has shine shield, get cascade that does not have shine shield.
3. Turn the water heater down to 130-135
SO WHY DOES THE UNIT HAVE A EXTRA HEAT BUTTON FOR HOTTER WATER
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17