View Single Post
  #28 (permalink)  
Old 04-23-2009, 09:31 AM
hughw hughw is offline
Junior Member
 
Join Date: Apr 2009
Posts: 1
hughw is on a distinguished road
Default

Quote:
Originally Posted by peters4n6 View Post
just bought the replacement handle for the GE Advantium SCA1001FSS.

After removing part# 1805 there is only access to the upper handle screw. The lower screw is behind a second inner panel. I removed the 6 screws from this inner panel, but I can't get it to budge. It seems like a lot of people don't have access to the 2nd(lower) screw. The advice I keep seeing is to look at the video (to remove the inner panel) which does not solve the problem. Any further input from the kind experts would be appreciated.
I'm having the same problem. The bottom screw is not accessible without removing #4. I tried this by removing the half dozen little screws that appeared to be holding it in, but it didn't budge. I don't want to break anything so help would be appreciated. It's hard to see but it looks like the plastic things that were holding the [lastic liner that I removed to start may also be holding #4. If that is true, should the half dozen screws I mentioned also be removed or do they hold something else?
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17