View Single Post
  #2 (permalink)  
Old 05-12-2013, 03:43 PM
scott5495 scott5495 is offline
Senior Member
 
Join Date: Apr 2013
Location: rocky mount, n.c.
Posts: 182
scott5495 is on a distinguished road
Default disposer

before you remove disposer check underneath in the center for a hole that will accept an allen wrench. some disposers came with one. if it has one take an allen wrench and see if you can break loose the plate by moving back and forth. sounds like something is stuck between the plate and the grinding wall. if it does not have a wrench receptacle, i usually take a large screwdriver and run it around the edge of the plate againts the wall to see if i can remove obstruction
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17