View Single Post
  #2 (permalink)  
Old 04-19-2013, 09:53 AM
fairbank56 fairbank56 is offline
Expert
APP Volunteer
 
Join Date: Oct 2012
Posts: 3,806
fairbank56 is a jewel in the rough
Default

When you put the coupler piece on the gearcase input shaft, are you able to freely rotate it in each direction by hand? If the input shaft rotates ok, you may have not pushed the coupler pieces far enough onto the motor and gearcase shafts causing excessive force on the motor when you try to install it. Make sure you did not lose any of the four rubber isolators from the motor/mount.

Eric

Last edited by fairbank56 : 04-19-2013 at 09:57 AM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17