View Single Post
  #5 (permalink)  
Old 04-16-2013, 01:34 PM
Paul Briant Paul Briant is offline
Junior Member
Join Date: Apr 2013
Posts: 7
Paul Briant is on a distinguished road
Default Thanks-- ordered the parts

Thanks Gene-- Fortunatly, I had not yet purchased that other part that you advised me was wrong. That was the part number Jenn-Air told me was for the control panel. I'm glad I didn't order from them, since it's the wrong part and they don't take any returns!
Just ordered both parts from here, which saved some money as well.
I'll post again when I get the parts. I may need some help.

Originally Posted by Gene View Post
Hi Paul,

The part you replaced is not the control panel. This is the control board which probably has nothing to do with the buttons problem. You have to order and replace the control panel.

In regards of the ignition problem very likely it caused by a bad spark module, especially if the new igniter did not fix it. You may want to check the wire between the igniter and the spark module first.

- The control panel Part number: 5760M339-60

Part number: 5760M339-60

- The spark module Part number: 71002783

Part number: 71002783

Here are the breakdown diagrams and Parts for Jenn-Air JGS8860BDP Range -

Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17