View Single Post
  #7 (permalink)  
Old 03-29-2013, 07:11 AM
turbofreek turbofreek is offline
Junior Member
 
Join Date: Mar 2013
Posts: 18
turbofreek is on a distinguished road
Default

It wil go into diagnosic mode. It gives no fault codes. It will go to COO and just sit there.

If a thermistor is bad wouldn't it still run for at least a minute? I've checked ohms at the board and at them. The one on the exhaust housing is 7k ohms.

As far as power st the motor. The two outside red wires. I get 110 from the top red to ground. I turned the dryer on so I could try to back track to where power is suppose to be. Why I came to the board being the culprit.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17