View Single Post
  #6 (permalink)  
Old 03-29-2013, 03:08 AM
denman denman is offline
Senior Expert
APP Volunteer
Join Date: Feb 2008
Posts: 19,638
denman is a splendid one to behold

Here are your parts
Parts for Maytag MEDB800VQ0 Dryer -

See the attachment for the tech sheet

Try to get into diagnostics to see if an error code will come up.

I have power to the motor on both sides.

I am not sure what you mean by both sides.
Also where are you measuring and what is being used as reference (neutral etc) ?

Motor ressistance is 2.2 and 2.4. I did notice I have 110 across the relay. Shouldnt that be no reading if the relay is ingages?
Yes the NO to Common on the relay should drop to 0 volts when the relay closes. So either something is holding the relay off or it's contacts are shot.
I doubt that the new board is bad.
It is not unknown that a replacement board is bad but it is very odd that you get exactly the same fault on both boards.
Attached Images
File Type: pdf MEDB800.pdf (798.4 KB, 4 views)
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17