View Single Post
  #2 (permalink)  
Old 03-15-2013, 10:35 AM
fairbank56 fairbank56 is offline
APP Volunteer
Join Date: Oct 2012
Posts: 3,806
fairbank56 is a jewel in the rough

The motor worked before replacing the timer??? If so, I'd say you may have a broken wire or have gotten a bad timer or the wrong timer. I can advise on making a test cable from an extension cord to test the motor if you have the tools and ability to do so? You'll need to strip the cable/wires and install quick-disconnect terminals. I may have the wiring diagram but I need a clear photo of the electronic control board to be sure it's the right one. There should have been a tech sheet with wiring diagram somewhere inside the control panel.

Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17