Originally Posted by Gene
You are welcome. The installation of this switch is pretty straight and should be very simple. Keep us posted.
Good morning, Gene.
The switch arrived and the installation was real straight forward (exact wiring scheme). However, there is one problem: the off position of the switch points to the three o'clock position instead of the original six o'clcok position. It is because the screw holes on the new switch are 90 degrees perpendicular to the original.
Is there another single switch or another switch knob we can use?
I appreciate the help you have already given. The off position may not be a big issue. However, if you have the ready information, I will be grateful.