View Single Post
  #6 (permalink)  
Old 01-01-2013, 08:37 PM
Vinnyboy6527 Vinnyboy6527 is offline
Junior Member
Join Date: Dec 2012
Posts: 4
Vinnyboy6527 is on a distinguished road

Originally Posted by Simon / APP Team View Post

.Locate the orifice at the top of the gas valve and turn it CCW 1/2 turn.
Also, is the top burners are OK? If not - you may have a bad pressure regulator.

See previous post. I started with your advice, and I was able to get it to work by turning the orifice about two turns CCW. My question is: why would this work? How does increasing the distance between the orifice and the inner nozzle give better gas burning?
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17