View Single Post
  #5 (permalink)  
Old 12-20-2012, 02:37 PM
danielcastro3669 danielcastro3669 is offline
Junior Member
 
Join Date: Dec 2012
Posts: 8
danielcastro3669 is on a distinguished road
Default

Quote:
Originally Posted by fairbank56 View Post
It is supposed to pause after draining. During the initial minute or two period of drain, it does not spin because the gearcase is in neutral drain mode. Pausing of the motor allows neutral drain to release. When it starts again, it should drain and spin. If it doesn't pause, you can do that manually by simply opening the lid for a few seconds and closing again. If this doesn't put it into spin, you will need to remove the cabinet, jump out the lid switch and observe the clutch operation during spin.

Eric
the clutch makes a click noise, and its getting extremely hot..is the clutch incharge of engaging the spin mode? thank you eric. i've had this no spin problem before and it's always been the lid switch.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17