View Single Post
  #6 (permalink)  
Old 12-09-2012, 11:41 AM
vaughng vaughng is offline
Junior Member
Join Date: Dec 2012
Posts: 5
vaughng is on a distinguished road

yep, you are correct, I took the clock apart and found a small burnt spot, one of the pins solder was melted away, I decided what have a got to loose, I soldered the pin back to the board and both elements are working but I do not think the oven is heating up according to the temp of the setting, is there a way to rest the oven, I know on a Kenmore there is. Thanks Denman for all of your advice,
Reply With Quote

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17