View Single Post
  #6 (permalink)  
Old 11-16-2012, 03:05 PM
denman denman is offline
Senior Expert
APP Volunteer
 
Join Date: Feb 2008
Posts: 17,222
denman is a glorious beacon of light
Default

OOPS!!!

Your readings up to "S" look OK.
But at this point I screwed up and should have told you that the Push to Start switch must be pushed for the other readings.

Note that the cycling thermostat does not matter as it is not part of the motor starting or run circuit
If the resistance readings are OK double check that you have 120 volts between L1 (black) and Neutral (white)
__________________
-

Last edited by denman : 11-16-2012 at 03:09 PM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17