I will check that, but the dryer runs on the cool cycles just not the heat ones. I am going to check the thermo fuse tonight.
I checked the continuity GY-WB and BK-BU are good T-W has continuity when the timer is in the off position.
The thromo fuse and high limit and bias have continuity.
The timer is working as it ticks and moves in all cycles. The heat cycles do nothing (drum does not move) but when the timer gets to the cool down the drum turns on and finishes the cycle.
I will have to cheak the igniter next. Is there an interlock that would cause the drum not to work if igniter was bad?
Last edited by jrss : 11-08-2012 at 06:29 PM.