View Single Post
  #27 (permalink)  
Old 10-24-2012, 10:01 AM
fyehoo fyehoo is offline
Junior Member
 
Join Date: Oct 2012
Posts: 2
fyehoo is on a distinguished road
Default Motor Ohms checked out but replacing it fixed the problem

Quote:
Originally Posted by applianceman View Post

I think it is either in the blower motor or the inverter. As I said before, the inverter is the only thing that will cause all three error-codes but I canít say for sure if it is your problem or not. I have been through this before and have seen the motor check ok ohms wise so I change the inverter then still end up having to replace the motor to get it going. I have called GE technical assistance for this reason and all they tell me is to replace both, which is not helpful at all.
Thanks Applianceman for the info. After the motor checked out I was left with the decision to replace the inverter or the motor. Based on your earlier posts I decided to try the motor first and this fixed the problem.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17