View Single Post
  #3 (permalink)  
Old 10-10-2012, 09:55 AM
Jlski Jlski is offline
Junior Member
 
Join Date: Oct 2012
Posts: 2
Jlski is on a distinguished road
Default

Quote:
Originally Posted by Simon / APP Team View Post
Hi.

Remove the screw and clamp holding the blower and pull out the blower.
Memories the way the clamp is installed.

Here are the breakdown diagrams and Backsplash, Blower & Motor Assembly parts for GE DWSR405GB1WW - AppliancePartsPros.com

Simon.
actually for this model you need to remove the two screws that hold the motor mount bracket to the base and the two long screws on the front that hold the motor attached blower flange to the blower assembly. Then you can slightly lift and pull the motor assembly with blower wheel attached towards the inside of the dryer. expect a lot of dust which in my case caused pushed the wheel into contact with the front assembly housing and caused the screeching noise.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17