View Single Post
  #3 (permalink)  
Old 10-08-2012, 12:50 PM
Rturner5 Rturner5 is offline
Junior Member
 
Join Date: Oct 2012
Posts: 1
Rturner5 is on a distinguished road
Default

Quote:
Originally Posted by cdominey View Post
But for those who have the same problem - ours was that the two small screws holding the "pole" to the switch were loose. Kill the power to the oven, remove the top panel, pull out the switch and make sure these small screws are tight. Tighten them with a small screwdriver (eyeglass repair type) if not. This worked for us.
Thank you for posting. This helped me. My little screws were actually all the way off and laying inside. Thanks again.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17