View Single Post
  #9 (permalink)  
Old 09-25-2012, 01:24 PM
Sandybean Sandybean is offline
Junior Member
 
Join Date: Aug 2012
Posts: 9
Sandybean is on a distinguished road
Default

I have a question about the voltage tests in the manual. It says at pin 1 and 6 I should get 120 volts, which I do. It says at pin 2, 9, and 10 the voltage should be less than 50v, and I get 50-55, 55-65, and 55-65 respectively. Is that close enough in the appliance world or does this point to a problem in the timer? Also, the manual just says to check the heavy cycle, but I checked the delicate cycle just for grins and in this mode pin 2 reads 120 volts. Does that seem normal?
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17