Repaced 6 Thermal fuses
Model Number: MDE9700AYM Brand:
5 - 10 years
I am hoping someone can help me because i am at a loss. About a year ago my dryer stopped getting hot so i relaced the heating element with a new one. I was told the one that i bougt would work i just needed to do some cutting of the bracket and install. After installing the new heater element i have been blowing the thermal fuse. I have rebuilt my ducting to 23 ft with one elbow (all clean). The fan wheel is not clogged and it blows air. I have even tried venting it into the laudry room. I also replaced the Thermostat. I have visually inspected the element and didn't see it touching anywhere to the metal. I have even asked the folks at my local appliance parts store and they are at a loss. Any suggestions would be greatly appreciated.