View Single Post
  #2 (permalink)  
Old 05-26-2012, 05:48 AM
ApplianceJunk's Avatar
ApplianceJunk ApplianceJunk is offline
Senior Expert
APP Volunteer
 
Join Date: Jul 2007
Location: Milbank, SD
Posts: 2,277
ApplianceJunk is on a distinguished road
Default

Hi,

I would check to see if there is voltage to the pump during the drain cycle.

If there is voltage to the pump during the drain cycle and the pump does not run then the pump is at fault and will need to be replaced.

I have never had to replace a control board on one of these washers because the pump would not run.
__________________
ApplianceJunk.com ~ DIY Appliance Repair Forum
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17