Originally Posted by maguiver77
So how likley that control board could of went bad. Is that normal when the control board burns up?
On this style and make of dishwasher, there are several ways to diagnose a control board issue. Of course, if there's visible damage on the board or components, then you'll have to replace the control board. If the board won't program or is "dead" you'll need to check for voltage through the door switches and into the control board. If the voltage is present, then you would want to circuit test the keypad/button for 10,000 ohms when the button is pressed, no resistance would indicate an issue in the control panel keypad. From there, you should be set and ready to order and replace the appropriate part. In the majority of cases, the control panel / keypad assembly, is the fault issue, it maybe a 70-75 % chance.
No, the control board "burning up" is not a very common occurence. It usually indicates a shorted component or wire, or voltage spike.
Good Luck and Thanks,