View Single Post
  #10 (permalink)  
Old 03-13-2012, 06:31 PM
jrmigs jrmigs is offline
Junior Member
 
Join Date: Mar 2012
Posts: 1
jrmigs is on a distinguished road
Default

Using the picture above, position the spring on the horizontal post (about 3" plastic pin) with the center spring loop facing back and the spring ends pointing up. Carefully lower the door (as if it were fully closed) over the spring ends. Press the lid firmly on each side, snapping it onto the post. Open the door, check to see that the spring ends are properly held inside the door. With a small flat screwdriver, simply pull the spring loop up and over the small catch - voila!
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17