[scsimpson]

Got my hands on a Fluke multi tester today. Start switch, Temp switch, the two thermal switches I could find and the door switch (light comes on when door is opened) all tested good. The timer motor gave me a reading of 6.3K ohm though. My repair book says it should be between 2-3K. So, I suspect the timer motor. Is 6.3K ohm too high? I'm electrically challenged which is why I ask.
None of the air ducts were clogged but were sort of linty so I cleaned them all out from the drum to the outside vent in the wall as well as all around the inside the dryer.