[m/c]

Originally Posted by ApplianceJunk

There should have been some instruction in the box.

Does your new valve have fittings like the one in this video?

Video: Connect and disconnect a push-in ice maker water fill valve plastic line

If so then you cut your old plastic nut ends off and slip the line into the new valve.

Hope that helps,

Thanks appliancejunk for the reply and the video link and yep the inlet valves have switched to quick connect fittings,the one that was sent was missing some of the quick connect inserts, Adam from this site is sending another unit (thanks Adam) and I'll see how it goes ...... take care