Thread: Breaker trips
View Single Post
  #3 (permalink)  
Old 11-12-2007, 07:19 PM
jim1958 jim1958 is offline
Junior Member
 
Join Date: Nov 2007
Posts: 2
jim1958 is on a distinguished road
Default poping breaker

Quote:
Originally Posted by Gene View Post
Hi Jim

If your dishwasher got shorted out within first minute it has nothing to do with the heating element because it is not powered up yet

The dishwasher starts with fill cycle for about 11/2 minute, then the wash pump will get engaged.

The first thing I would check are the wires under the dishwasher and inside the door for a damaged insulation and possible shortage.

Post your findings, please.

Good luck.
Gene.

The dishwasher belongs to my daughter. I when over to check it out. It did have water in the tub. I drained the water and tried the washer it was a dead short now. I disconnected the wires to the heating element and it runs OK. When I was disconnecting the wires some water leaked out. I not sure if I caused that problem by maybe beaking the seal or not. But once I unplugged the element the short when away. The element looks OK. No cracks and the element did heat up when I was testing the dishwasher. Any ideas?

thamks
jim
Reply With Quote