Thread: icing problem
View Single Post
  #2 (permalink)  
Old 01-23-2009, 05:38 AM
kayakcrzy kayakcrzy is offline
Senior Expert
APP Volunteer
 
Join Date: Feb 2008
Location: Missouri
Posts: 2,429
kayakcrzy will become famous soon enough
Default

when you defrosted the coil, at the bottom of the coil is the heater. it is held in by 2 phillips head screws, one on each side of it. that is most likely the problem. ge has finally changed that single heater out to a double heater. i do replace a ton of them. the part # is wr51x10101. if you had an ohm meter to check it, you could verify it. it could be the defrost thermostat, or the defrost timer, but from what i see on a daily basis, i would go with the heater as an educated guess. if you need more help let me know. tom ******************************************** - parts
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17