View Single Post
  #8 (permalink)  
Old 10-18-2011, 10:01 PM
jd49 jd49 is offline
Junior Member
 
Join Date: Aug 2011
Posts: 2
jd49 is on a distinguished road
Default

Hope this works for you. I was so lucky to find this post.

I got a dozen CAPs cheap on the site where you can bid for anything.
Find C1 written on the printer circuit board. You will see the size and the specs 220uf 50 volt written on the side. Using a soldering iron, heat each connection to pop each off the board. Put a new one in the same holes - make sure you get - & + wires in right holes - and re-solder.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17