First be sure the temperature in the freezer is stable at 12 degrees F or below.If its not the thermostat in the ice maker wont close and allow power to the valve.
Check all wiring and the plug to the ice maker.
Check the tube where the water comes in to see that its not frozen not allowing water to come into the ice maker cup.
If you have an ohm meter, take the harness off the coil that supplies the water to the ice maker. With the meter set at RX10 it should read between 200-500 ohms of resistance. If it doesn't read between those two it is defective.
The thermostat in the ice maker head can be tested for continuity. It should have continuity at its coldest. ( frozen )
__________________
Need a part? Buy appliance parts from us. Fast delivery and great prices.
Thank you for supporting our free repair help forum.
|